Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
cloudappliance/multihomed [2018_05_30 14:34] – created kamrancloudappliance:multihomed [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
Line 1: Line 1:
-# Adding a Second Network Interface to the File Fabric™ For Administration (Draft) 
- 
-## Overview 
-File Fabric™ administrators may wish to add a second network interface to the File Fabric™ appliance so that server management can be done without using with the File Fabric’s™ application network interface.  These notes, which are intended for experienced Linux system administrators who also have a good understanding of File Fabric™ system administration, summarize how to do this.  Extensive File Fabric™ application knowledge is not needed. 
- 
-The procedure consists of two parts: 
-1. Changing the File Fabric™ appliance’s configuration so that a specific IP address will be used for all network access to the File Fabric. 
-2. Establishing a second network interface with its own IP address for server management. 
- 
-Important Points to Note Before Beginning 
- 
-1. All commands should be executed as root. 
- 
-2. The appliance should be configured with smeconfigserver before executing the steps in this document. 
- 
-3. If smeconfigserver is run after these steps have been performed then the changes made by following these steps may be overwritten and have to be repeated. 
- 
-These notes refer to two IP addresses: 
-- *IPADDRESS*  - the IPV4 address of the interface you will use for the File Fabric™. 
-- *IPADMINADDRESS* – the IPV4 or IPV6 address you will use for server management. 
- 
-Changing the File Fabric™ Appliance’s Configuration  
-### Apache HTTPD 
-####HTTP Protocol 
-``` 
-vi /etc/httpd/conf/httpd.conf 
-``` 
-Change Listen directive from: 
-Listen 80 
-to: 
-Listen IPADDRESS:80 
-Listen 127.0.0.1:80 
-HTTPS protocol 
-vi /etc/httpd/conf.d/ssl.conf 
-Change listen ports from: 
-Listen 443 https 
-to: 
-Listen IPADDRESS:443 https 
-Listen 127.0.0.1:443 https 
-Restart Apache 
-systemctl stop httpd 
-systemctl start httpd 
-FTP* Services 
-FTP Service 
-vi /var/www/smestorage/ftpserver/ftpserver.conf 
-And bind to the IP address: 
-ftp_server_ip=IPADDRESS 
-SFTP Service 
-vi /var/www/smestorage/ftpserver/sftpserver/sftpserver.conf 
-and replace: 
-ftp_server_ip=0.0.0.0 
-with: 
-ftp_server_ip=IPADDRESS 
-Restart FTP Services 
-systemctl stop cloudftp 
-systemctl start cloudftp 
-Establishing a Second Network Interface 
-ZZZ Fabric™ administrators may wish to add a second network interface to the File Fabric™ appliance so that server management can be done without using with the File Fabric’s™ application network 
-SSH IP Binding 
-  vi /etc/ssh/sshd_config 
-Change Listen IP address 
-ListenAddress IPADMINADDRESS 
-Restart service 
-systemctl restart sshd