Differences

This shows you the differences between two versions of the page.

--- cloudappliance/multihomed [2018_09_04 17:59] – removed (TM) as not valid here steven
+++ cloudappliance:multihomed [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-# Adding a Second Network Interface to the File Fabric For Administration
-## Overview
-File Fabric administrators may wish to add a second network interface to the File Fabric appliance so that server management can be done without using with the File Fabric’s™ application network interface.  These notes, which are intended for experienced Linux system administrators who also have a good understanding of File Fabric™ system administration, summarize how to do this.  Extensive File Fabric application knowledge is not needed.
-The procedure consists of two parts:
-. Changing the File Fabric appliance’s configuration so that a specific IP address will be used for all network access to the File Fabric.
-. Establishing a second network interface with its own IP address for server management.
-Important Points to Note Before Beginning
-. All commands should be executed as root.
-. The appliance should be configured with smeconfigserver before executing the steps in this document.
-. If smeconfigserver is run after these steps have been performed then the changes made by following these steps may be overwritten and have to be repeated.
-These notes refer to two IP addresses:
-- *IPADDRESS*  - the IPV4 address of the interface you will use for the File Fabric™.
-- *IPADMINADDRESS* – the IPV4 or IPV6 address you will use for server management.
-## Changing the File Fabric™ Appliance’s Configuration
-### Apache HTTPD
-####HTTP Protocol
-```
-vi /etc/httpd/conf/httpd.conf
-```
-Change Listen directive from:
-```
-Listen 80
-```
-to:
-```
-Listen IPADDRESS:80
-Listen 127.0.0.1:80
-```
-#### HTTPS protocol
-`vi /etc/httpd/conf.d/ssl.conf`
-Change listen ports from:
-```
-Listen 443 https
-```
-to:
-```
-Listen IPADDRESS:443 https
-Listen 127.0.0.1:443 https
-```
-Restart Apache
-```
-systemctl stop httpd
-systemctl start httpd
-```
-### FTP* Services
-#### FTP Service
-```
-vi /var/www/smestorage/ftpserver/ftpserver.conf
-```
-And bind to the IP address:
-```
-ftp_server_ip=IPADDRESS
-```
-#### SFTP Service
-```
-vi /var/www/smestorage/ftpserver/sftpserver/sftpserver.conf
-```
-and replace:
-```
-ftp_server_ip=0.0.0.0
-```
-with:
-```
-ftp_server_ip=IPADDRESS
-```
-Restart FTP Services
-```
-systemctl stop cloudftp
-systemctl start cloudftp
-```
-## Establishing a Second Network Interface
-Fabric™ administrators may wish to add a second network interface to the File Fabric™ appliance so that server management can be done without using with the File Fabric’s™ application network
-### SSH IP Binding
-```
-vi /etc/ssh/sshd_config
-```
-Change Listen IP address
-```
-ListenAddress IPADMINADDRESS
-```
-Restart service
-```
-systemctl restart sshd
-```